GS101 GRAFFITI REMOVER
· Safe - No hazard labelling
· Effective - Removes most types of graffiti quickly
· Eco-Friendly - Low toxicity, fully biodegradable formula
Recent legislation has restricted the use of many of the solvents previously used in graffiti removal or imposed strict labelling requirements and safety precautions.
GS101 uses modern solvent technology to give excellent performance on a wide range of surfaces combined with a low risk to the user and the environment. It contains no chlorinated solvents, ketones, lactates, NMP or aromatic hydrocarbons but is based on modern alternatives with a low vapour risk, low odour and low environmental impact. GS101 does not require any hazard labelling, special protective equipment or procedures other than common sense precautions.
GS101 is available in both liquid and gel forms, it rinses with water and is fully biodegradable.
APPLICATIONS AND DIRECTIONS
Graffiti Removal: GS101 will remove graffiti such as spray paint, household paint, marker pen or crayon from hard surfaces both indoors and outdoors including masonry and concrete.
GS101 liquid performs well as a spray and wipe application on non-porous surfaces. For porous surfaces or difficult jobs, use the gel and increase contact time. GS101 will, in many cases act more thoroughly than traditional products.
Apply with a brush or spray over the whole area of the stain. Allow 10-15 minutes to act. Use a stiff brush to agitate stubborn graffiti and hose or rinse off with water, preferably using a high pressure cleaner where possible.
Graffiti which has been left for long periods on a porous outdoor surface such as concrete or brickwork may require longer contact times or more than one application. On masonry, it is safe to use long contact times (more than 1 hour) if necessary.
Paint Stripping: GS101 will strip many types of paint from wood, metal and masonry by the application method (gel) or immersion (liquid). Contact times of at least 30 minutes should be allowed.
ODOUR NEUTRALISER
* Binds and chemically neutralises odours – not a masking agent
* Kills odour causing bacteria and moulds
* Replaces malodours with a pleasant, fresh fragrance
BIOSAFE ODOUR NEUTRALISER removes unpleasant odours by binding with odour causing compounds such as fatty acids, mecaptans, thioethers and sulphides which are then neutralized. BIOSAFE ODOUR NEUTRALISER contains a biocide which acts effectively against a wide range of bacteria, fungi and moulds which may produce odour causing compounds.
BIOSAFE ODOUR NEUTRALISER leaves behind a persistent fresh, clean fragrance. It is effective against odours from human and animal waste, food, industrial processes and smoke.
Use in a variety of applications including;
Carpets and Upholstery
Toilet areas
Animal houses
Automotive
Waste plants and landfills
Refuse storage areas and skips
Food waste and processing plants
Industrial Odours
Smoke contamination
BIOSAFE ODOUR NEUTRALISER may be sprayed, misted or applied as a liquid. Dilutions of up to 100:1 can be effective depending upon application and odour source.
NATRUSOL
A citrus oil based degreaser containing naturally occurring solvents. Effective degreasing without the need to utilise any harmful solvents. Dissolves oil bound contamination such as tar, bitumen and grease and materials of a waxy, resinous or fatty nature. Safe to use on most plastics.
HAND SOAPS
HARD SURFACE SANITIZERS AND DISINFECTANTS